Hi-Temp Spray Protoplass© - Product Information
 

Hi-Temp Protoplass© Spray when used with Proto-Reinforcement© Infiltrate Coating will enhance your Thermal Properties when applied to a SFF/RP part. This is achieved by using our base tempering formula, micro blended plasticizers, alumina, ceramic and inhibitors. Like all RP Tempering™ compounds it is very fast drying, cost effective and easy to apply. Colors are available in Black & Clear 12oz. cans:

The above pictured heat deflection test called for this tensile bar to be cantilevered with 1.81 MPa of weight on top of tensile bar at the end while in 80% humidity. It is important to remember that on the heat deflection test the parts were cantilevered with weight out on the free end. In most real world applications this would be attached, which should result in a high heat deflection value. The average Heat Deflection enhancement over the base material specification when tempering is applied is 3X. The average heat resistance enhancement over the base material specification when tempered is 4X.
"ENHANCES PARTS MADE FROM THE FOLLOWING SYSTEMS: FDM, SLA, SLS, Digitally Printing & Others"

Multiple materials equaling hundreds of samples have been tested with Hi-Temp Protoplass© using the RP Tempering™ Engineered Layering Technique. Thermal Property Test Data can be found on the Hi-Temp Protoplass© Test Data Sheets. AS™ industry test standards were followed whenever possible. Test Data will include: Heat Deflection (1.81 Mpa & Dwell Time), Heat Resistance, Thermal Conductivity, T/g, Coefficient of Thermal Expansion/Contraction, Melting Point, Insulation Heat, & Insulation Cold. The Hi-Temp Protoplass© when applied will result in a smooth finish and a layering thickness of .0013”. Other inherent enhancements are chemical resistance, mechanical properties and resistance to hot wax for use in casting molds.