RP Tempering™ Technologies would like to introduce our new EMI Shielding product line featuring your choice of multiple highly conductive 1 to 3 micron sized conductive particles. EMI-Temp© offers our customers multiple easy to follow application techniques for every EMI & RFI Shielding Product. EMI-Temp© is easy to apply, dries fast and is cost effective verses sending out to an EMI Shielding House at a premium part price, long lead times & setup cost for masking fixtures.
The most common electrical property applications are for EMI/RFI shielding. The initials “EMI” stands for Electro Magnetic Interference. Electromagnetic shielding can be achieved by using highly conductive materials, such as 1 to 3 micron sized copper, silver, stainless steel, aluminum or nickel particles. EMI Shielding is done for two primary reasons:
• To keep electronic device from interfering with others.
• To keep other devices from interfering with yours.
EMI-Temp© Shielding was developed for low volume use for rapid prototypes (all SFF materials & systems), injection molded plastics and many other materials. This particular shielding product has copper/aluminum/nickel combined. Some of our conductive coatings can even reflect the interfering radiation light waves.
Wetted EMI-Temp© Coating - The copper particles dispersed in our carrier solution will meet most common EMI shielding applications. Effective in the 30MHz to 250MHz range and blocking decibel ranges from 25dB to 40dB by 85% to 90%. Apply by masking the specified area to be shielded. Next either brush or spray on the Wetted EMI-Temp© per our tempering instructions to meet your required specification. RP Tempering™ has developed a portable spaying system for applying any of our dispersed particle shielding products. See our website or ask a customer representative for more details.
Dry EMI-Temp© Kit – To achieve higher conductivity applying dry copper mixed particles to the actual surface substrate may be required in single and/or multiple layers. Masking of the application area is usually required before applying the tempering materials. Brush the particles on like a coat of paint with the foam brush supplied in the kit. Next you seal the particles to the surface by applying the carrier/sealer resin also supplied in the kit per our tempering instruction. Effective in the 200MHz to 900MHz range and blocking decibel ranges from 40dB to 80dB by 95% to 99%.
For easy to use instructions and engineered layering techniques please read EMI-Temp© Shielding Application Procedures and Standard Application Procedures. These procedures, MSDS and Technical Data sheets for EMI-Temp© Shielding are available on our website at www.RPTempering.com. Free product sampling is available to qualified users.