Proto-Reinforcement© Infiltrate Coating - Product Information
 

Proto-Reinforcement© Infiltrate Coating is used in most of our Engineered Layering Techniques. Proto-Plasma-Rx™ Spray when
used with Proto-Reinforcement© Infiltrate Coating and sometimes RP Tempering™ Compound will enhance your Mechanical
Properties when applied to an SFF/RP part. Like all RP Tempering™ compounds it is very fast drying, cost effective and easy to
apply. Colors are available in Clear only.

Proto-Reinforcement© compound will enhance mechanical properties, chemical resistance, elasticity and elongation. It can create a part capable of holding fluids such as gasoline. Proto-Reinforcement© is easy to apply and is used as an outside coating in combination with one of our other products. It is packaged in 8 oz. cans, 1 gallon containers, or 55 gallon drums. With further development, this compound could be used in an automated process.
"ENHANCES PARTS MADE FROM THE FOLLOWING SYSTEMS: FDM, SLA, SLS, Digitally Printing & Others"

Depending on the base SFF/RP material used the typical mechanical property enhancements are: Increased Impact Strength, Torsion Durability & 3 Point Flex Strength. Tensile Strength will not change and Flexural Modulus will stay within 3% of its original specification depending on the RP Tempering™ Engineered Layering Technique & materials used.

Other Physical & Typical Property Enhancements to be expected are: Seals Porosity to a Microscopic Level, Excellent Chemical Resistance (Moisture, Water, Humidity & more), Thermal (Heat Deflection, Heat Resistance, UV Resistance, Insulative ), Electrical Insulative, and Vibration.

Multiple materials equaling hundreds of samples have been tested with Proto-Plasma-Rx™ using RP Tempering™ Engineered Layering Techniques. Test Data can be found on the Proto-Plasma-Rx™ Test Data Sheets. AS™ industry test standards were followed whenever possible.

RP Tempering™ Technologies and Patented Engineering Techniques were developed to enhance Rapid Manufacture parts made from SFF systems. SFF technology presents OEM’s with an opportunity to create and design geometric pre-engineered shapes within the wall of the physical part. RP Tempering™ internal wall geometry technology and additive materials science will enhance SFF parts either in combination or individually to include: Mechanical Properties, Electrical Properties, Thermal Properties and Chemical & Environmental Resistance Properties